Spindles & Adaptors

Online Catalogue | Spindles & Accessories | Spindles & Adaptors

Standard Mop Taper
Use with mops and felts from 1" diameter to 6" diameter.(25mm-150mm)
Spec: Length total =76mm, Length of taper = 32mm, Diameter of shank = 6mm, Taper 3mm>15mm

Price: £3.00 (Including VAT at 17.5%)

Quantity:

Long Taper
Ideal for mini polishing mops and unmounted fellts for jobs where extra reach is needed.
Spec: Length total =125mm, Length of taper = 30mm, Diameter of shank = 6mm, Taper 3mm>10mm
Use with 1" - 2" diameter polishing mops.
Use with 1"- 3" diameter felts.

Price: £3.00 (Including VAT at 17.5%)

Quantity:

Mini Taper for Cartridge Rolls
For use with cartridge rolls and tapers. See abrasive section.
Spec: Length total = 80mm, Diameter of shank 6mm.
Price: £2.00 (Including VAT at 17.5%)

Quantity:

Mini Drill Taper
For use with Mini polishing mops (1"-2") and unmounted felts.
Spec: Length total =55mm, Length of taper = 14mm, Diameter of shank = 6mm, Taper 2mm>6mm

Price: £2.00 (Including VAT at 17.5%)

Quantity:

Dremel Taper
A very small taper commonly used with dremel bits and very small unmounted felts.
Spec: Length total =46mm, Length of taper = 10mm, Diameter of shank = 2mm, Taper 1mm>6mm

Price: £2.00 (Including VAT at 17.5%)

Quantity:

M14 Angle grinder adaptor
Picture will appear soon.
For use with angle grinders. M14 spec.
Internal bore=M14 spec.
Length total=104mm
length of taper=50mm
Diameter of body=22mm
Taper=6mm>22mm
Price: £8.00 (Including VAT at 17.5%)

Quantity:

1/2" Bench Grinder Adaptor
For 6" bench grinders or polishing machines with a 1/2" shaft diameter The adaptor slides onto existing benchgrinder shaft. IMPORTANT please check the shaft size of machine before purchase. If unsure please phone.
Spec:
Internal Bore=1/2"
Length total =120mm
Length of taper = 40mm
Diameter of body = 20mm
Taper 4mm>20mm
Please Note- From a front position (the position you operate the machine from). If adaptor is Right handed then its to your right hand & Left handed to your left hand.

Price: £6.50 (Including VAT at 17.5%)

Please Choose

Quantity:

3/4" Bench Grinder Adaptor
For larger 8" bench grinders or polishing machines with a 3/4" shaft diameter.The adaptor slides onto existing benchgrinder shaft. IMPORTANT please check the shaft size of machine before purchase. If unsure please phone.
Spec:
Internal Bore=3/4"
Length total =180mm
Length of taper = 52mm
Diameter of body = 32mm
Taper 4mm>32mm

Please Note- From a front position (the position you operate the machine from). If adaptor is Right handed then its to your right hand & Left handed to your left hand.
Price: £12.00 (Including VAT at 17.5%)

Please Choose

Quantity:

5/8" Bench Grinder Adaptor
For larger 8" bench grinders or polishing machines with a 5/8" shaft diameter. The adaptor slides onto existing benchgrinder shaft. IMPORTANT please check the shaft size of machine before purchase. If unsure please phone.
Spec:
Internal Bore=5/8"
Length total =150mm
Length of taper = 40mm
Diameter of body = 25mm
Taper 4mm>25mm

Please Note- From a front position (the position you operate the machine from). If adaptor is Right handed then its to your right hand & Left handed to your left hand.
Price: £8.50 (Including VAT at 17.5%)

Please Choose

Quantity:

Online Catalogue | Spindles & Accessories | Spindles & Adaptors